Ricoh M018 Service Manual page 203

Fax Maintenance
Overseas
Comm Mode
Overseas Comm
Mode Settings
Minimum Time
Length
Dial Pulse Setting Dial Pulse Type
Tone Signal
Transmission
Time Length
Minimum Pause
In Tone Dialing
Tone Signal
Attenuator For
Settings
Pseudo Ring
Backtone To the
Line
DTMF Level
SM Appendix
This sets the machine to ignore a DIS signal sent
from the called station once in a sending
operation.
[Off (Default)/ Ignore DIS Once]
If this setting is set to "On", the machine detects
the CNG signal after the line is connected. If it is
set to "Off", the machine detects the CNG signal
as long as the line is connected.
[100 Ms/ 200 Ms/ 300 Ms/ 400 Ms (Default)]
This sets the number of pulses that are generated
during dialing.
N: Dialing '0' generates 10 pulses --- Dialing '9'
generates 9 pulses.
N+1: Dialing '0' generates 1 pulses --- Dialing
'9' generates 10 pulses.
10-N: Dialing '0' generates 10 pulses ---
Dialing '9' generates 1 pulse.
Sets the tone signal transmission time length
[100 ms (Default)]
Sets the minimum pause during tone dialing
[100 ms (Default)/ 150 ms/ 200 ms]
Sets the attenuator for pseudo ringback tone to the
line
[0 to 15 / 10 (Default)/ 1 dB/step]
Sets the transmission level of DTMF tones.
[-12 dBu / -11 dBu/ -10 dBu/ -8 dBu/ -6 dBu]
4-11
Service Menu
M018/M019