Polaris BRUTUS Owner's Manual page 39

MAINTENANCE
Auger Gearbox Fluid Change
WARNING!
.
AVOID INJURY OR DEATH
Wear safety glasses to prevent eye injury when any of the following
conditions exist:
• When fluids are under pressure
• Flying debris or loose material is present
• Engine is running.
• Tools are being used.
Tip: Fluid such as engine oil, hydraulic fluid, coolants, grease, etc. must
be disposed of in an environmentally safe manner. Some regula-
tions require that certain spills and leaks on the ground must be
cleaned in a specific manner. See local, state and federal regula-
tions for the correct disposal.
Remove drain plug (Item 1) from the bottom side of the gearbox.
Draining the fluid into an approved container and cleaning up
any spills.
Install and tighten drain plug.
Remove the check plug (Item 2).
Remove the fill plug (Item 3).
Add oil (Polaris Premium Angle Drive Fluid) through the fill
port (Item 3) until the oil begins to flow out of the check port
(Item 2).
Install and tighten check plug (Item 2) and fill plug (Item 3).
38
.
.
1
3
2