OPERATION
Installation
Installing The Snow Blower
9. Install the pin (Item 5) and retainer pin (Item 6) (both sides).
Leveling The Snow Blower
The snow blower should be leveled before every use. This will
position the snow blower parallel to the ground.
1. The tilt cylinder (Item 1) is used to adjust the front to back
level of the attachment.
2. Using the tilt function of the utility vehicle, level the snow
blower.
3. Once the attachment is leveled - engage the tilt lock. See
page 21.
Tip: Once the attachment is leveled, the tilt function of the utility vehicle
can be locked so it does not need to be readjusted. (See the
BRUTUS Owner's Manual for additional information).
NOTICE: AVOID PTO DRIVELINE DAMAGE. PTO powered
attachments are not compatible with the tilt cylinder full range
of motion. Engage the tilt cylinder lock once the attachment is
level to prevent PTO driveline damage.
18
6
5
1