Philips Vari-lite VL3015LT User Manual page 71

4
M S : S -T
ENU YSTEM ELF ESTS
Movement Disable
The Movement option allows pan and tilt to be disabled so that the luminaire can be placed in any
position for testing without movement occurring. In order to regain full control of the luminaire,
Movement will need to be enabled after testing.
Note: When using the Movement option, pan and tilt will be disabled for all the luminaires that are
linked.
WARNING: If the Followspot Handle accessory is installed, you must use the FLW Spot (Follow
Spot Operational Mode) setting in Setup menu. Movement Disable is temporary setting and is not
retained when power is disengaged from the fixture. The FLW Spot setting is retained when power is
disengaged until changed in the menu setting by the user.
To set movement option:
Step 1. Press [Menu].
Step 2. Press [Up] / [Down] arrows until Config appears. Press [Enter].
Step 3. Press [Up] / [Down] arrows until Pan/Tilt appears. Press [Enter].
Step 4. Movement will be displayed. Press [Enter].
Step 5. Use [Up] / [Down] arrows to select Enable or Disable. Press [Enter] to select.
02.96 98.000 2 0 1 3 Dec emb er 2 012 55