Appendix E. Digidesign Control Panel (Mac Os 9 Only) - DigiDesign Mbox Getting Started Manual

appendix e
Digidesign Control Panel (Mac OS 9 Only)
If you are running Mac OS 9 and plan to use
your Digidesign hardware with Apple Sound
Manager-compatible applications, you will need
to install the Digidesign Control Panel.
To install the Digidesign Control Panel:
Run the Pro Tools LE Installer and select the
Digidesign Control Panel option. (See "Install-
ing Pro Tools LE" on page 19.)
Digidesign Control Panel
To configure the Digidesign Control Panel:
From the Apple menu, choose Control Panels
1
> Digidesign.
Digidesign Control Panel
Click the Setup Hardware button in the
2
Digidesign Control Panel.
Configure the Hardware Setup dialog.
3
To use your Digidesign hardware with Apple Sound
Manager:
From the Apple menu, choose Control
1
Panels > Sound.
Click the Output tab.
2
Select Digidesign, and close the Sound Con-
3
trol Panel.
When you plan to use Pro Tools again, change
4
the Output back to "Built-In" before you launch
the Pro Tools application.
Apple Sound Control Panel
When using Digidesign hardware to moni-
tor Sound Manager applications, under the
Alerts tab, turn the Alert Volume control
down.
Appendix E: Digidesign Control Panel (Mac OS 9 Only) 71