Brake belt contact surface ���������������������������������� 11 Chain 1/2“ x 1/8“ ������������������������������������������������� 12 Freewheel sprocket ��������������������������������������������� 13 Spare parts list ��������������������������������������������� 14 Important Read the manual carefully before using the cycle and save it for future use. 2013 MONARK EXERCISE AB, Vansbro, Sweden...
Monark Exercise AB Monark has 100 years’ experience of bicycle production. The Monark tradition has yielded know-how, experience, and a real feel for the product and quality. Since the early 1900s, Monark’s cycles have been living proof of precision, reliability, strength and service. Those are the reasons why we are now the world leader in cycle ergometers and the market leader in Scandinavia in transport cycles.
52 kg (114 2/3 lbs) Max user weight 250 kg (551 lbs) Each 828 E is calibrated at the factory. This means that you can begin to use the ergometer directly after Included assembly.
(the formula is 1W=0,2388x10 kcal/s with four decimals), but when you normally show calories you want to show the total amount of calories your body has used during your training, not only the calories "burnt" on the flywheel. Monark 828 E...
Fig: Placement of the chest belt Do not expose the meter to direct sunlight or extremely high temperature. Do not use any dissolvents when cleaning. Use only dry cloth. Fig: Electrodes on the back of the chest belt (1) Monark 828 E...
In case of problems, turn off WiFi, Bluetooth and similar on computers nearby. Although some fluorescent lamps can interfere with heart rate re- ception. Any problems with the computer • Send an email to the software developer HUR labs support: software@hur.fi software Monark 828 E...
EC Directive 1999/44/EC. In short, tightened on the crank axle, tighten if necessary. the directive states for that your Monark Dealer will When the Ergometer is new it is important to tighten be liable for any defects, which existed at the time of the pedals after 5 hours of pedalling (4 times per delivery.
The flywheel bearing is long-term greased and requires no supplementary lubrication. If a problem arises, Brake belt contact surface please contact your Monark dealer. Deposits of dirt on the brake belt and on the contact surface may cause the unit to operate unevenly and will Crank bearing also wear down the brake belt.
Otherwise the chain 5) Movement direction and sprockets make a lot of noise and wear out rapidly. 6) Chain lock Then assemble the removed parts as above but in reverse order. Monark 828 E...
The sprocket should be lubricated with a few drops of oil once a year. Tilt the cycle to make it easier for the oil to reach the bearing. See Fig: Lubrication. Fig: Lubrication Fig: Hub assembly Monark 828 E...
Need help?
Do you have a question about the Ergomedic 828 E and is the answer not in the manual?
Questions and answers