► Error Code
M2–2113
► Error message
Paper jam at the top of duplex path
► Symptom
Paper is not reached at the duplex jam sensor and jam has occurred.
► Troubleshooting method
•
Jam Occurrence Location
1) Check if there is any substance on duplex path. Remove it.
2) Clean the surface of the duplex roller-1. If it is broken or deformed, replace it(JC66–03510A).
3) Enter SVC mode. Execute duplex motor1 test. (Diagnostics > Engine Diagnostics > Engine Test Routines >
DUPLEX 1–MOTOR IN/OUT)
Copyright© 1995-2013 SAMSUNG. All rights reserved.
4. Troubleshooting
4-206