Radio Modes; Conventional Mode - HYT TC-265 Service Manual

Radio Modes

1. Frame of Radio Modes
Select the function from the modes and make settings according to your needs.
User Mode
Dealer Mode
2. Description of Mode Functions

Conventional Mode

PC Mode
Dealer Mode
All Reset Mode
Manual Adjust Mode
Wired Clone Mode
Test Mode
Mode
TC-265/365 SERVICE MANUAL
Conventional Mode
1
PC Mode
2
All Reset Mode
3
Manual Adjust Mode
4
Wired Clone Mode
5
Function
This mode is used for normal operation.
This mode is used to read/write parameters from/to
the radio and to make settings via PC.
This mode is used for the dealer to set the
following modes: All Reset Mode; Manual Adjust
Mode; Wired Clone Mode.
This mode is used to initialize the radio function
settings, channel data and destination and to
enable/disable manual adjust mode.
This mode is used for the factory or dealer to make
the following adjustment: frequency stability, RX
sensitivity, squelch
CTCSS/CDCSS deviation, tone deviation and low
battery alert reference value.
This mode is used to transfer data from one radio
to another by an interface cable.
Spare
－ －
5
level, transmit power,