HYT TC-265 Service Manual page 10

Function Setting:
Function Function
No. Name
1 Monitor
2 Channel
Scan
3 Priority
4 Priority
Channel
5 Look
Back A
6 RX Dwell
Time
7 Dropout
Delay
Time
8 TX Dwell
Time
9 Talk Back
Setting (Defaults are
underlined)
OFF
Monitor Momentary
Monitor Lock
SQ OFF Momentary
OFF
CO
TO
OFF
ON
0, 1-16
0
0.5-5.0s
1.0s
(step: 0.1s)
0.5-5.0s
3.0s
(step: 0.1s)
0.1-5.0s
3.0s
(step: 0.1s)
0.1-5.0s
3.0s
(step: 0.1s)
Current
Start + Last Stopped
TC-265/365 SERVICE MANUAL
Display
1 OFF Disable
1 1 AF channel opens when [MONI] is
held down.
1 2 Squelch opens when [MONI] is held
down. Switches each time [MONI] is
held down.
1 3 Squelch opens when [MONI] is held
down and
received.
2 OFF Disable
2 CO Carrier operated scan (resume)
2 TO Time operated scan (resume)
3 OFF No priority setting
3 1 Set priority channel
4 1 Priority (Only
priority " is enabled)
4 16
5 0.5 The period that radio checks a priority
channel from a normal channel when
5 5.0
there is no activity on priority channel.
6 0.5 Time until scan resumes when it is
stopped by signal input (Only valid in
6 5.0
time-operated scan).
7 0.1 Time until scan resumes when there is
no signal after it is stopped by signal
7 5.0
input.
8 0.1 Time until scan resumes after transmit
stops without compatible channel
8 5.0
associated signaling; Scan resume
time is decided by dropout delay
time/RX
carrier-operated/time-operated
mode if
associated signaling appears.
9 0 It's the current channel during scan.
9 1 It's the channel where scan resumes
during scan; it's the channel where
scan is stopped during scan.
－ －
9
Remarks
compatible signal is
valid when "fixed
dwell time and
scan
compatible channel