D I S A S S E M B L Y F O R R E Pa I - HYT TC-265 Service Manual

TC-265/365 SERVICE MANUAL
Disassembly for Repair
Remove the case assembly from the chassis
1. Remove the two knobs ① and three ring nuts ②.
2. Remove the two screws ③.
3. Expand the right and left sides of the bottom of the case assembly, lift the chassis, and remove it from
the case assembly.
3. Taking care not to cut the speaker lead, separate the chassis and the front cover assembly.
Remove the latch
Raise the latch on the bottom part of the case assembly, insert a small flat screwdriver into the space
between the case and latch, open the case carefully and remove the latch.
Note: Do not force to separate the case from the latch.
－ －
58