CHAPTER 3. REPAIR INSTRUCTION
NOTE1 (Assembling)
Setting the position during assembling
OPTICAL UNIT
2.16 OPTICAL UNIT-(2)
(1) CCD UNIT, CCD RUBBER, IR FILTER
1. Remove the three screws e.
2. Remove the CCD UNIT.
NOTE1 (Assembling)
Align it with the two dowels that determine position of the OPTICAL UNIT.
3. Remove the CCD RUBBER.
4. Remove the IR FILTER.
NOTE2 (Assembling)
Apply the DIA BOND 1663G.
(1)-4
IR FILTER
(1)-3
CCD RUBBER
Fig. 3-18 OPTICAL UNIT-(2)
*1
3-18
NOTE2 (Assembling)
(1)-2
CCD UNIT
(1)-1
e
XA4-9140-307
(SELF TAP)
e
3.0mm
METAL
M1.4