Main Pcb Ass'y-(2) - Canon PowerShot A300 Service Manual

CHAPTER 3. REPAIR INSTRUCTION
MAIN PCB ASS'Y,
MAIN SHIELD 1 CASE,
MAIN SHIELD 3 CASE,
Position where insulation tape is
to be attached.
MAIN SHIELD 2 CASE

2.8 MAIN PCB ASS'Y-(2)

(1) MAIN SHIELD 2 CASE
1. Remove soldering from one position.
2. Remove the MAIN SHIELD 2 CASE.
NOTE (Assembling)
Attach the insulation tape at the specified position.
(1)-1 Soldering
Insulation tape
Insulation tape
NOTE (Assembling)
Fig. 3-10 MAIN PCB ASS'Y-(2)
3-10
(1)-2
MAIN SHIELD 2 CASE
(1)-2