Elect. Capacitor - Canon PowerShot A300 Service Manual

CHAPTER 3. REPAIR INSTRUCTION
Double-sided adhesive tape
(1)-1

ELECT. CAPACITOR

NOTE2 (Assembling)
How to route the wire.
DIA BOND 1663G
2.14 ELECT. CAPACITOR
(1) ELECT. CAPACITOR
1. Remove the ELECT. CAPACITOR in the way of pushing it from the rear of the MAIN FRAME.
NOTE1 (Assembling)
Attach the double-sided adhesive tape to ELECT. CAPACITOR.
2. Remove soldering and remove the two lead wires (gray) and (orange).
NOTE2 (Assembling)
Route the wires as shown in the illustration and apply the DIA BOND 1663G after soldering.
NOTE1 (Assembling)
Gray
DIA BOND 1663G
ELECT. CAPACITOR
Gray
Fig. 3-16 ELECT. CAPACITOR
(1)-2 Soldering
Orange
Orange
*1
3-16
(1)-1
MAIN FRAME