Disassembly/Assembly; Procedure - Canon PowerShot A300 Service Manual

2. Disassembly/Assembly

2.1 Procedure

Disassembling procedure of PowerShot A300 is shown by the following flowchart.
Reverse the disassembling procedure to reassemble them. * The pages to refer are shown in parenthesis ( ).
Some parts can be disassembled not following the procedure shown below. (See interactive.)
Note : At the respective steps, *1 indicates that the "DIA BOND 1663G that has adhered to the parts should be
removed".
REAR COVER UNIT
BATTERY COVER
FRONT COVER UNIT, CF COVER,
BATTERY COVER SPRING
CAUTION
MICROPHONE,
MICROPHONE BUSH
MAIN PCB ASS'Y (1)
FLASH UNIT
RLS PCB ASS'Y
BATTERY (-) CONTACT,
BATTERY (+) CONTACT
ELECT. CAPACITOR
OPTICAL UNIT (1)
BATTERY LOCK PLATE,
BATTERY LOCKER
LITHIUM (+) CONTACT,
LITHIUM (-) CONTACT
(3-4)
(3-6) BACK LIGHT UNIT,
LCD PANEL
(3-7)
Be careful of high tension.
BATTERY CONTACT PLATE
(3-8)
(3-9)
(3-12) MAIN SHIELD 2 CASE
(3-14)
MAIN PCB ASS'Y,
MAIN SHIELD 1 CASE,
MAIN SHIELD 3 CASE
(3-15)
M-S FPC
(3-16)
(3-17)
CCD UNIT, CCD RUBBER,
(3-19) IR FILTER, OPTICAL UNIT
(3-20)
3-3
CHAPTER 3. REPAIR INSTRUCTION
(3-5)
(3-6)
(3-10)
(3-11)
(3-13)
(3-18)