Canon PowerShot A300 Service Manual page 75

3
4
5
NOTE :
If you cannot install Factory Mode Driver in above procedure, install it in the following procedure.
1. Change the camera to Factory mode.
2. Install Wizard of new hardware starts up.
3. Select the option that directly chooses the driver's place.
4. Choose CAP_FACT.INF
(Factory Mode Driver\Win2000_98\Win_2k98\CAP_FACT.INF).
5. Installment starts. When the Wizard finishes, the installment finishes.
)
)
3-25
CHAPTER 3. REPAIR INSTRUCTION
Choose Destination Location
Select folder where Setup will install files.
Click the "??[N]>" button.
InstallShield Wizard Complete
Click the "??" button.
Click the "OK" button.
Installing TWAIN (Factory Mode)
Driver is completed.