LG 50PQ30 Training Manual page 67

TIP:
The connectors
to the Y-SUS
board are very
easy to
misalign and
plugged in.
The Connector
will be below
the actual pins
on the Y-SUS.
Look carefully.
See Tip section
page 133-134.
PANEL
SIDE
Upper Y - Drive Layout
Upper Y - Drive Layout
FG5V Volts from the
Y-SUS board and Logic
Signals from the Control
through the Y-SUS
board are supplied to
the Upper Y-Drive
Board on Connector
P109.
Y-Drive signal (VSC)
from the Y-SUS board
through the Y-Drive
lower is supplied to the
Upper Y-Drive Board on
Connector P108.
Y-SUS
SIDE
67 November 2009 50PQ30 Plasma