LG 50PQ30 Training Manual page 62

P101 Y - SUS 15V and 5V to Control board P111 Information
P101 Y - SUS 15V and 5V to Control board P111 Information
Voltage Measurements for the Y-SUS Board Location: Just below P201
Location
Y-SUS Board B+ checks for the P101 connector.
FS201
5V to run the Control Board.
Leaves the Control Board on P101
pins 4~7.
Can also be checked at J843 M5V TP.
Standby: 0V Run: 5V
Diode Check: 0.86V
FS501 and 15V Test Point
15V to run the Z-SUS Board.
Routed out P101 to the Control
Board.
Leaves the Control Board on
P101 pins 11 and 12.
Can also be checked at J642 15V TP.
Standby: 0V Run: 15V
Diode Check: Open
Location: Bottom Center Right
62 November 2009 50PQ30 Plasma