Activating The Dsp Modes - JVC RX-7010VBK Instructions Manual

Activating the DSP Modes

You can use only one DSP mode at a time. When a DSP mode is
activated, another DSP mode is canceled if in use.
For Dolby Pro Logic, Dolby Digital, and DTS
Digital Surround
1. Press SURROUND ON/OFF.
• Each time you press the button, the Dolby/DTS Surround turns
on and off alternately.
SURROUND ON/OFF
On the front panel
2. Select and play a sound source.
• To enjoy Dolby Pro Logic, play back a software encoded with
Dolby Surround and labeled with
• To enjoy Dolby Digital, play back a software encoded with
Dolby Digital and labeled with
• To enjoy DTS Digital Surround, play back a software encoded
with DTS Digital Surround and labeled with
To cancel the Dolby/DTS Surround mode
Press SURROUND ON/OFF again. ("SURROUND OFF" appears
on the display.)
SURROUND ON/OFF
On the front panel
SURROUND
ON/OFF
On the remote control
mark.
DOLBY SURROUND
mark.
D I G I T A L
mark.
SURROUND
ON/OFF
On the remote control
For the other DSP modes
1. Press DSP MODE repeatedly until the mode
you want appears on the display.
• Each time you press the button, the DSP modes change. (See
page 22 for more details.)
DSP MODE
On the front panel
2. Select and play a sound source.
• To enjoy JVC Theater Surround, play back a software encoded
with Dolby Surround and labeled with
To cancel the DSP mode
Press DSP MODE repeatedly until "DSP OFF" appears on the
display.
DSP MODE
On the front panel
DSP
MODE
On the remote control
mark.
DOLBY SURROUND
DSP
MODE
On the remote control
26