Canon PIXMA MX700 series Quick Start Manual page 168

10
The Installation completed successfully
screen appears.
When using Windows Vista:
To use the Card Slot over network, mount the Card
Slot using the Canon IJ Network Tool after software
installation is complete. For details, refer to "Using
the Card Slot over a Network" in the User's Guide
on-screen manual.
If only one CD-ROM is included in the package
for the Windows setup
Click Exit.
After clicking Exit, remove the CD-ROM.
~
Note
• If Restart is displayed, make sure that the Restart
the system now (recommended) check box is
selected, then click Restart.
Remove the CD-ROM after clicking Restart and
restarting the computer.
• Keep the CD-ROM in a safe place in case you need
to reinstall the software.
If two CD-ROMs are included in the package for
the Windows setup
When the Continue to Windows (CD-2) screen
appears, perform the following steps (1) to (3) to
complete the installation, then go to step 10.
(1) Click Exit.
~
Note
If Restart is displayed, make sure that the Restart the
system now (recommended) check box is selected,
then click Restart.
(2) Remove the Setup CD-ROM "Windows
(CD-1 )" and insert the Setup CD-ROM
"Windows (CD-2) Macintosh".
(3) Follow the on-screen instructions to proceed
with the setup.
After installation is complete, remove the
CD-ROM.
~
Note
Keep the CD-ROMs in a safe place in case you need
to reinstall the software.
16
cau,..,
Installation c::omp-Ieted 5ucc:essfuUy.
10
The Installation completed successfully
screen appears.
When using Windows Vista:
To use the Card Slot over network, mount the Card
Slot using the Canon IJ Network Tool after software
installation is complete. For details, refer to "Using
the Card Slot over a Network" in the User's Guide
on-screen manual.
If only one CD-ROM is included in the package
for the Windows setup
Click Exit.
After clicking Exit, remove the CD-ROM.
~
Note
• If Restart is displayed, make sure that the Restart
the system now (recommended) check box is
selected, then click Restart.
Remove the CD-ROM after clicking Restart and
restarting the computer.
• Keep the CD-ROM in a safe place in case you need
to reinstall the software.
If two CD-ROMs are included in the package for
the Windows setup
When the Continue to Windows (CD-2) screen
appears, perform the following steps (1) to (3) to
complete the installation, then go to step 10.
(1) Click Exit.
~
Note
If Restart is displayed, make sure that the Restart the
system now (recommended) check box is selected,
then click Restart.
(2) Remove the Setup CD-ROM "Windows
(CD-1 )" and insert the Setup CD-ROM
"Windows (CD-2) Macintosh".
(3) Follow the on-screen instructions to proceed
with the setup.
After installation is complete, remove the
CD-ROM.
~
Note
Keep the CD-ROMs in a safe place in case you need
to reinstall the software.
16
cau,..,
Installation c::omp-Ieted 5ucc:essfuUy.