Table of Contents
Advertisement
The Settings menu can be used to
alter the machine's electronics to suit
changing requirements.
Settings can be altered at any time.
To open the Settings menu
^ Close the door of the washing
machine.
^ Turn the programme selector to the
Finish position.
^ Place the display template on top of
the control panel.
^ Switch on the washing machine.
^ Press both the ~ and OK buttons at
the same time until the following
appears in the display:
Settings
Language !
Continue
This will take you into the Settings
menu.
To select a setting
^ Press the ~ button until the setting
you want is highlighted in the display.
^ Press the OK button to select the
setting.
To select an option
^ Press the ~ button until the option
you want is highlighted in the display.
^ Press the OK button to select the
option.
A tick L will appear beside the option
to show that it has been set.
To change a value
Some settings do not have any options
but the set value can be altered.
The set value will increase each time
the ~ button is pressed. Once the
maximum setting has been reached,
the value will revert to the minimum
setting the next time the button is
pressed.
Press the OK button to confirm the
value you want.
To come out of the selected setting
Select
has options.
To close the Settings menu
^ Switch off the washing machine.
OK
Language
You can change the language via the
Language sub-menu.
The flag after the word language acts
as a guide to prevent a language which
will not be understood from being set.
A tick L will appear beside the
language selected to show that it has
been set.
Back A
from a setting which
!
The display can be set to appear in
one of several different languages.
Settings menu
59
Hide quick links:
Advertisement
Table of Contents
