Specifications - JVC RX-6510VBK Instructions Manual

Jvc audio/video control receiver instructions
Table of Contents

Advertisement

Specifications

Amplifier
Audio
Audio Input Sensitivity/Impedance (1 kHz):
Audio Input (DIGITAL IN)* :
*Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround (with sampling frequency — 32 kHz, 44.1 kHz, 48 kHz).
Audio Output Level:
Signal-to-Noise Ratio ('66 IHF/'78 IHF):
Frequency Response (8
Video
Video Input Sensitivity/Impedance:
Composite video:
Video Output Level:
Composite video:
Synchronization:
Signal-to-Noise Ratio:
35
Output Power
At Stereo operation:
Front channels:
At Surround operation:
Front channels:
Center channel:
Rear channels
CD, TAPE/CDR, TV SOUND, VCR, DVD: 220 mV/47 k
Coaxial: DIGITAL 1 (DVD):
Optical: DIGITAL 2 (CD):
TAPE/CDR, VCR:
CD, TAPE/CDR, TV SOUND, VCR, DVD: 87 dB/67 dB
)
CD, TAPE/CDR, TV SOUND, VCR, DVD: 20 Hz to 20 kHz (±1 dB)
Bass boost:
+3 dB ±1.0 dB at 100 Hz
Tone Control:
Bass (100 Hz):
Treble (10 kHz):
VCR, DVD:
S-video:
VCR, DVD:
VCR, MONITOR OUT:
S-video:
VCR, MONITOR OUT:
Negative
45 dB
100 W per channel, min. RMS, driven into 8 ,
40 Hz to 20 kHz with no more than 0.8% total
harmonic distortion.
100 W per channel, min. RMS, driven into 8
more than 0.8% total harmonic distortion.
100 W, min. RMS, driven into 8
0.8% total harmonic distortion.
100 W per channel, min. RMS, driven into 8
more than 0.8% total harmonic distortion.
0.5 V(p-p)/75
–21 dBm to –15 dBm (660 nm ±30 nm)
220 mV
±10 dB
±10 dB
(Y: luminance):
(C: chrominance, burst): 0.286 V(p-p)/75
(Y: luminance):
(C: chrominance, burst): 0.286 V(p-p)/75
at 1 kHz with no
at 1 kHz, with no more than
at 1 kHz, with no
1 V(p-p)/75
1 V(p-p)/75
1 V(p-p)/75
1 V(p-p)/75

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx-6510vbkc

Table of Contents