Operating Video Components - JVC RX-6510VBK Instructions Manual

Operating Video Components

IMPORTANT:
To operate JVC's video components using this remote control:
• Some JVC VCRs can accept two types of the control signals —
remote code "A" and "B." Before using this remote control, make
sure that the remote control code of the VCR connected to the
VCR jacks is set to code "A."
• When using the remote control:
– For the DVD player, TV and VCR operations, aim the remote
control directly at the remote sensor on each component, not on
the receiver.
CATV/DBS VCR
POWER POWER
DVD
TV SOUND VCR
BASS
SURROUND DSP
ON/OFF MODE
BASS BOOST EFFECT
TEST
SOUND
7/P
MUTING
10
RETURN
CATV/DBS
CONTROL CONTROL
CH
TV/VIDEO
TUNING
REC
PAUSE
RM-SRX6510J
A/V CONTROL RECEIVER
29
TV AUDIO
POWER POWER
CD FM/AM
TAPE/CDR
TREBLE
ANALOG/DIGITAL SLEEP
INPUT
– CENTER +
1 2 3
MENU
– REAR • L +
4 5 6
ENTER
– REAR • R +
8 9
– SUB WOOFER +
0
+10
100 +
FM MODE
TV VOL VOLUME
PLAY
/REW FF/
PAUSE
STOP CONTROL
VCR
You can always perform the following operations:
VCR POWER:
Turns on or off the VCR.
After pressing VCR (or CONTROL repeatedly until "VCR" appears
on the display window), you can perform the following operations
on the VCR:
1 – 9, 0:
Selects the TV channels on VCR.
PLAY3: Starts playing.
REW: Rewinds a tape.
FF:
Fast winds a tape.
STOP7: Stops operations.
PAUSE8:
Pauses playing. To release it, press PLAY3.
REC PAUSE: Starts recording or enters recording pause.
CH +/–:
Changes the TV channels on the VCR.
Note:
You can use either VCR button or CONTROL button to activate the
buttons listed above. If you press VCR, the playing source also
changes. On the other hand, if you press CONTROL repeatedly to
select "VCR," the playing source does not change.
DVD player
After pressing DVD, you can perform the following operations on a
DVD player:
PLAY3: Starts playing.
4 4 4 4 : 4
Returns to the beginning of the current (or previous)
track.
¢ ¢ : ¢ ¢ ¢
Skips to the beginning of the next track.
STOP7: Stops playing.
PAUSE8:
Stops playing temporarily. To release it, press
PLAY3.
After pressing DVD, these buttons
can be used for the DVD menu
operations.
Note:
For detailed menu operations, refer to the
instructions supplied with the discs or the
DVD player.
TV
You can always perform the following operations:
TV POWER: Turns on or off the TV.
TV VOL +/–: Adjusts the volume.
TV/VIDEO:
Sets the input mode (either TV or VIDEO).
After pressing TV SOUND, you can perform the following
operations on a TV:
CH +/–:
Changes the channels.
1 – 9, 0, 100+: Selects the channels.
RETURN:
Alternates between the previously selected channel
and the current channel.
– CENTER +
2 3
MENU
– REAR • L +
TEST
4 5 6
ENTER
– REAR • R +
8 9