Table of Contents
Advertisement
BT Diverse 5350 ~ 5th Edition ~ 19th June '03 ~ 5193
Handset does not ring.
The incoming caller's number is
not displayed even though you
have Caller Display.
You keep hearing the error beep
(a descending tone).
The answering machine does
not record any messages or
announcements.
An answering machine message
does not have a time stamp.
During remote operation you are
unable to access messages
You cannot record your voice
pattern for voice activation.
You cannot dial, or use the
answering machine via voice
activation.
The handset ringer may be
switched off.
The caller's number has been
withheld.
You have pressed the wrong
button in a sequence.
Memory is full.
The date/time is not set.
You have not changed the base
station PIN.
Your recordings might have
sounded too different or were
not clear enough.
Your speech or commands were
not clear enough or, you have
not recorded the voice activate
for these commands.
BT Diverse Helpline – 08457 908 070
Hold down
to switch the ringer
back on.
Caller has to allow their number to
be sent.
Check the prompts in the display
or refer to instructions in the
user guide.
Delete old messages.
Playback and delete new messages.
Set the date/time, see page 13.
Change the base station PIN to
allow you to access messages
from another phone.
Try recording again but ensure you
speak clearly and record the words
using a similar tone.
Try speaking more closely or, ensure
voice activation is initiated.
73
Advertisement
Table of Contents
