Confi Guration And Operation; Controls; Led Indicators - Kaco blueplanet XP10UH4 Instruction Manual

C onfigu ra t ion an d Op e r a ti on
8

Confi guration and Operation

8.1

Controls

The inverter has a backlit LCD as well as three status LEDs. The inverter is operated using six keys.
1
2
3
4
Figure 18: Control panel
Key
1 "Operating" LED
2 "Feed-in" LED
3 "Fault" LED
4 LCD panel
8.1.1

LED indicators

The three LEDs on the front of the inverter show the diff erent operating states as shown below. The LEDs may be illumi-
nated (lit - solid green), fl ashing or not illuminated (unlit).
LED illuminated
The LED indicators show the following operating states:
Operating state LEDs
Start
Feed-in start
* The waiting period ensures that the PV array voltage continuously remains above the power delivery limit of 250 V.
Installation Instructions blueplanet XP10U H4 / H6 and XP10U H4 / H6 PSD
5
6
7
LED fl ashing
Display
Power fed into the grid
or measured values
5
6
7
4-way key
"Enter" key
"ESC" key
LED not illuminated
Description
The green "Operating" LED is illuminated
if an AC voltage is present,
independently of the DC voltage.
The green "Operating" LED is illuminated.
The green "Feed-in" LED is illuminated after
the country-specifi c waiting period*.
The inverter is ready to feed in, i.e. is on the
grid.
You can hear the line relay switch turn on.
Page 29