About This Section - Genie Z-45/25 Service Manual

Hide thumbs Also See for Z-45/25:
Table of Contents

Advertisement

First Edition • Second Printing
Scheduled Maintenance Procedures
Observe and Obey:
Maintenance inspections shall be completed by
a person trained and qualified on the
maintenance of this machine.
Scheduled maintenance inspections shall be
completed daily, quarterly, six months, annually
and every 2 years as specified on the
Maintenance Inspection Report.
Failure to perform each procedure
as presented and scheduled may
cause death, serious injury or
substantial damage.
Immediately tag and remove from service a
damaged or malfunctioning machine.
Repair any machine damage or malfunction
before operating machine.
Keep records on all inspections for three years.
Unless otherwise specified, perform each
maintenance procedure with the machine in the
following configuration:
· Machine parked on a flat, level surface
· Boom in stowed position
· Turntable rotated with the boom between
the non-steering wheels
· Turntable secured with the turntable
rotation lock
· Key switch in the
OFF
key removed
· Wheels chocked
Part No. 52709
position with the
Genie Z-45/25 & Genie Z-45/25J
Section 4 • Scheduled Maintenance Procedures

About This Section

This section contains detailed procedures for each
scheduled maintenance inspection.
Each procedure includes a description, safety
information and step-by-step instructions.
Symbols Legend
Safety alert symbol—used to alert
personnel to potential personal
injury hazards. Obey all safety
messages that follow this symbol
to avoid possible injury or death.
Red—used to indicate the
presence of an imminently
hazardous situation which, if not
avoided, will result in death or
serious injury.
Orange—used to indicate the
presence of a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
Yellow with safety alert symbol—
used to indicate the presence of a
potentially hazardous situation
which, if not avoided, may cause
minor or moderate injury.
Yellow without safety alert
symbol—used to indicate the
presence of a potentially
hazardous situation which, if not
avoided, may result in property
damage.
Green—used to indicate operation
or maintenance information.
Indicates that a specific result is expected after
performing a series of steps.
4 - 1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Z45/25j

Table of Contents