Specifications - JVC LVT0142-006A Instructions Manual

Specifications

Amplifier
Output Power
At Stereo operation: 100* watts per channel, min. RMS, driven into
8 ohms, at 1 kHz with no more than 0.9 %
total harmonic distortion. (IEC268-3/DIN)
At Surround operation:
Front Channels: 80* watts per channel, min. RMS, driven into
4 ohms at 1 kHz with no more than 0.8 % total
harmonic distortion.
Center channel: 80* watts, min. RMS, driven into 4 ohms at 1
kHz, with no more than 0.8 % total harmonic
distortion.
Rear channels: 80* watts per channel, min. RMS, driven into
4 ohms at 1 kHz, with no more than 0.8 %
total harmonic distortion.
(* Measured on AC 110V, 127V, 220V, and
240V)
Total Harmonic Distortion (8 ohms, 1 kHz):
0.8%** at 100 watts output
(** Measured by JVC Audio Analysis
System, on AC 110V, 127V, 220V, and
240V)
Audio
Audio Input Sensitivity/Impedance (1 kHz):
PHONO (MM): 2.7 mV/47 k ohms
CD, TAPE/MD, TV SOUND, VCR, DVD:
220 mV/47 k ohms
Audio Output Level: TAPE/MD, VCR 220 mV
Signal-to-Noise Ratio ('66 IHF/DIN):
PHONO: 70 dB/66 dB
CD, TAPE/MD, TV SOUND, VCR, DVD:
87 dB/67 dB
Frequency Response (8 ohms)
PHONO: 20 Hz to 20 kHz (±1 dB)
CD, TAPE/MD, TV SOUND, VCR, DVD:
20 Hz to 20 kHz (±1 dB)
RIAA Phono Equalization: ±1 dB (20 Hz to 20 kHz)
Video
Video Input Sensitivity/Impedance:
Composite video: VCR, DVD:
1 Vp-p/75 ohms
S-video: DVD (Y: luminance): 1 Vp-p/75 ohms
(C: chrominance, burst): 0.286 Vp-p/75 ohms
Video Output Level:
Composite video: VCR, MONITOR OUT
1 Vp-p/75 ohms
S-video: MONITOR OUT
(Y: luminance): 1 Vp-p/75 ohms
(C: chrominance, burst): 0.286 Vp-p/75 ohms
Synchronization: Negative
Signal-to-Noise Ratio: 45 dB
On-Screen Color System: PAL
FM tuner (IHF)
Tuning Range: 87.50 MHz to 108.00 MHz
Usable Sensitivity: Monaural: 17.0 dBf (1.95 µV/75 ohms)
50 dB Quieting Sensitivity
Monaural 21.3 dBf (3.2 µV/75 ohms)
Stereo 41.3 dBf (31.5 µV/75 ohms)
Signal-to-Noise Ratio (IHF-A weighted)
Monaural 78 dB at 85 dBf
Stereo 73 dB at 85 dBf
Total Harmonic Distortion:
Monaural 0.4 % at 1 kHz
Stereo 0.6 % at 1 kHz
Stereo Separation at REC OUT: 35 dB at 1 kHz
Alternate Channel Selectivity:
60 dB: (±400 kHz)
Frequency Response:30 Hz to 15 kHz: (+0.5 dB, –3 dB)
AM tuner
Tuning Range: 531 kHz to 1,602 kHz (at 9 kHz interval)
530 kHz to 1,600 kHz (at 10 kHz interval)
Usable Sensitivity: Loop antenna
Signal-to-Noise Ratio
General
Power Requirements: AC 110V/127V/220V/230-240V ,
Adjustable with the voltage selector, 50/
60 Hz
Power Consumption: 250 watts (at operation)
5 watts (in standby mode)
Dimensions (W x H x D): 435 x 146 x 403.5 mm
(17
Mass: 10.2 kg (22.5 lbs)
Designs & specifications are subject to change without notice.
400 µV/m
50 dB (100 mV/m)
3 3 15
/ x 5 / x 15 / inches)
16 4 16
34