Selecting The Fm Reception Mode - JVC LVT0142-006A Instructions Manual

To tune in a preset station
On the front panel:
1. Press FM/AM to select the band.
The cursor control % / fi / @ / # buttons can
be now used for operating the tuner.
• Each time you press the button, the band alternates between
FM and AM.
2. Press cursor control % / fi
repeatedly until " – PRESET +"
appears on the display.
3. Press cursor control @ / # to
select a preset channel station.
• Pressing @ decreases the preset channel
number.
• Pressing # increases the preset channel
number.
From the remote control:
1. Press FM/AM.
• Each time you press the button, the band
alternates between FM and AM.
2. Press 10 keys to select a preset
channel number.
• For channel number 5, press 5.
• For channel number 15, press +10 then 5.
• For channel number 20, press +10 then 10.
• For channel number 30, press +10, +10,
then 10.
Note:
When you use the 10 keys on the remote control, be sure that they
are activated for the tuner, not for the CD and others. (See page 31.)
FM/AM

Selecting the FM Reception Mode

When an FM stereo broadcast is hard to
receive or noisy
You can change the FM reception mode while receiving an FM
broadcast.
On the front panel ONLY:
1. Press FM/AM to select the band.
The cursor control % / fi / @ / # buttons can
be now used for operating the tuner.
• Each time you press the button, the band alternates between
FM and AM.
2. Press cursor control % / fi
repeatedly until "FM MODE"
appears on the display.
100 1k
3. Press cursor control @ / # to
switch the FM reception "AUTO"
or "MONO."
DELAY TEST SURROUND
1 2 3
EFFECT – CENTER +
4 5 6
MENU – REAR•L +
7/P 8 9
100+ – REAR•R +
RETURN
+10 0 10
ENTER
100 1k
100 1k
AUTO: When a program is broadcasted in stereo, you will hear
MONO: Reception will be improved although you will lose the
10k
MUTE AUTO
10k
10k
stereo sound; when in monaural, you will hear
monaural sounds. This mode is also useful to suppress
static noise between stations. The MUTE AUTO
indicator lights up on the display.
stereo effect. In this mode, you will hear noise while
tuning into the stations. The MUTE AUTO indicator
goes off on the display.
FM/AM
EON
TA
NEWS
INFO
VOLUME
EON
TA
NEWS
INFO
VOLUME
EON
TA
NEWS
INFO
VOLUME
14