Download Print this page

JVC 0497OFYOTKJEMEN Instructions Manual

Jvc audio/video control receiver instructions
Hide thumbs

Advertisement

Quick Links

AUDIO/VIDEO CONTROL RECEIVER
AUDIO/VIDEO-RECEIVER MIT STEUEREINHEIT
AMPLI/TUNER DE COMMANDE AUDIO/VIDEO
GEINTEGREERDE AUDIO/VIDEO-VERSTERKER
RECEPTOR DE CONTROL DE AUDIO/VÍDEO
RICEVITORE DI CONTROLLO AUDIO/VIDEO
RX-530RBK
/I
TV
TV
VCR
AUDIO
/VIDEO
PRESET SEA MODE
+
CH
1
2
3
TEST
DELAY
SURR MODE
CH
4
5
6
+
REAR
CD
7/P
8
9
+
CENTER
TAPE
CD-DISC
10
+10
AUDIO
SEA
SURROUND
FM/AM
CONTROL
ON/OFF
ON/OFF
TV CONTROL
+
VCR
TV
VOLUME
ONE TOUCH
VIDEO
OPERATION
PTY SEARCH
DISPLAY
+
PTY SELECT
PHONO
+
VOLUME
MUTE
RM-SR530RU REMOTE CONTROL
STANDBY
STANDBY/ON
MASTER VOLUME
RX-530R
AUDIO/VIDEO CONTROL RECEIVER
DISPLAY MODE
TA/ NEWS /INFO
EON
PTY SEARCH
POWER
PHONES
SPEAKERS
1
2
_ON —OFF
_ON —OFF
INSTRUCTIONS
BEDIENUNGSANLEITUNG
MANUEL D'INSTRUCTIONS
GEBRUIKSAANWIJZING
MANUAL DE INSTRUCCIONES
ISTRUZIONI
TUNER/BAND
PRESET SEA
SOURCE
SURROUND
ADJUST
SETTING
+
MEMORY
ONE TOUCH OPERATION
ENHANCED COMPULINK CONTROL SYSTEM
For Customer Use:
Enter below the Model No. and Serial
No. which are located either on the rear,
bottom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
LET0021-001A
[EF, G]

Advertisement

loading

  Related Manuals for JVC 0497OFYOTKJEMEN

  Summary of Contents for JVC 0497OFYOTKJEMEN

  • Page 1 AUDIO/VIDEO CONTROL RECEIVER AUDIO/VIDEO-RECEIVER MIT STEUEREINHEIT AMPLI/TUNER DE COMMANDE AUDIO/VIDEO GEINTEGREERDE AUDIO/VIDEO-VERSTERKER RECEPTOR DE CONTROL DE AUDIO/VÍDEO RICEVITORE DI CONTROLLO AUDIO/VIDEO RX-530RBK AUDIO /VIDEO PRESET SEA MODE TEST DELAY SURR MODE – – REAR – CENTER TAPE CD-DISC RX-530R AUDIO/VIDEO CONTROL RECEIVER AUDIO SURROUND FM/AM...
  • Page 2 L or coloured red. IF IN DOUBT - CONSULT A COMPETENT ELECTRICIAN. Per I’ltalia: “Si dichiara che il questo prodotto di marca JVC è conforme alle prescrizioni del Decreto Ministeriale n.548 del 28/08/95 pubblicato sulla Gazzetta Ufficiale della Repubblica Italiana n.301 del 28/12/95.”...
  • Page 3 CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. ACHTUNG Zur Verhinderung von elektrischen Schlägen, Brandgefahr, usw: 1. Keine Schrauben lösen oder Abdeckungen enternen und nicht das Gehäuse öffnen.
  • Page 4 Caution –– POWER switch and STANDBY/ON This apparatus is provided with a POWER switch to be able to minimize power consumption for safe use. Therefore, 1. When doing initial setting, complete all the connections required, connect the mains plug into the wall outlet, and set the switch to ON.
  • Page 5 Caution: Proper Ventilation To avoide risk of electric shock and fire and to protect from damage. Locate the apparatus as follows: Front: No obstructions open spacing. Sides: No obstructions in 10 cm from the sides. Top: No obstructions in 10 cm from the top. Back: No obstructions in 15 cm from the back Bottom:...
  • Page 6: Table Of Contents

    Using the Preset SEA Modes ... 22 Selecting Your Favorite SEA Mode ... 22 Using the Surround Processor ... 24 Using JVC’s Hall Surround ... 24 Speaker Arrangement for Dolby Surround ... 26 Preparing for Dolby Surround ... 27 Using Dolby Surround ... 30 COMPU LINK Remote Control System ...
  • Page 7: Switches, Buttons And Controls

    / SURROUND ON/OFF button (25, 29, 30) z TV CONTROL buttons (TV, VOLUME (+/–)) (33) x ONE TOUCH OPERATION button (15) c Operating buttons for JVC audio/ video components and RDS operating buttons (19, 32, 33) v MUTE button (11) Page 2...
  • Page 8: Getting Started

    Getting Started This section explains how to connect stereo components and speakers to the receiver, and how to connect the power supply. Before Installation General • Be sure your hands are dry. • Turn the power off to all components. •...
  • Page 9: Connecting The Fm And Am (Mw/Lw) Antennas

    Connecting the FM and AM (MW/LW) Antennas FM Antenna Connections IA L FM Antenna ANTENNA FM 75 COAXIAL Outdoor FM Antenna LOOP AM (MW/LW) Antenna Connections ANTENNA FM 75 COAXIAL AM (MW/LW) Loop Antenna LOOP AM (MW/LW) Wire Antenna Note : Make sure the antenna conductors do not touch any other terminals, connecting cords or power cord.
  • Page 10: Connecting The Speakers

    Connecting the Speakers You can connect the following speakers: • Two sets of front speakers to produce normal stereo sound • One set of rear speakers to enjoy the surround effect • One center speaker to produce more effective surround effect (to make human voices outstanding) •...
  • Page 11 About the speaker impedance of the speakers CAUTION: When connecting speakers, use speakers with the same SPEAKER IMPEDANCE indicated by the speaker terminals. Notes: • The required speaker impedance of the front speakers does not differ depending on whether both the FRONT SPEAKERS 1 and FRONT SPEAKERS 2 terminals are used or only one of them is used.
  • Page 12: Connecting Audio/Video Components

    Connecting the subwoofer speaker Connect the input jack of a powered subwoofer to the SUBWOOFER OUT jack on the rear panel, using a cable with RCA pin plugs. Powered subwoofer Connecting Audio/Video Components You can connect the following components to the receiver using cables with RCA pin plugs. Audio Components •...
  • Page 13: Connecting Audio Components For The Compu Link-3 Remote Control System

    The COMPU LINK-3 remote control system allows you to control other JVC audio components from the receiver or vice versa. To use this system, connect your JVC audio components and the receiver with the cable (monaural mini-plug) supplied with those components.
  • Page 14: Connecting The Power Cord

    Connecting the Power Cord Before plugging the receiver into an AC outlet, make sure that all connections have been made. 1. Plug the power cord into an AC outlet. 2. Press POWER The STANDBY lamp lights up. A small amount of power is always consumed. _ON —OFF To shut off the power completely: Press...
  • Page 15: Basic Operations

    Basic Operations The following operations are commonly used when you play any sound source. Turning the Power On and Off (Standby) On the front panel: To turn on the power, press STANDBY/ON STANDBY The STANDBY lamp goes off. The name of the current source (or station frequency) appears on the display. STANDBY/ON MUTE TUNED AUTO STEREO PRO LOGIC 3CH LOGIC HALL...
  • Page 16: Selecting The Front Speakers

    Selecting the Front Speakers When you have connected two sets of front speakers, you can select which to use. Pressing SPEAKERS 1 or SPEAKERS 2 activates the respective set of speakers. To use the set of speakers connected to the FRONT SPEAKERS 1 terminals, press SPEAKERS 1 to set SPEAKERS it in the _ON position, and press SPEAKERS 2 to set it in the —OFF position.
  • Page 17: Recording A Source

    Recording a Source You can record any source playing through the receiver to a cassette deck connected to the TAPE jacks and VCR connected to the VCR jacks at the same time. While recording, you can listen to the selected sound source at whatever sound level you like, without affecting the sound levels of the recording.
  • Page 18: Basic Settings

    Basic Settings Some of the following settings are required after connecting and positioning your speakers in your listening room, while others will make operations easier. Adjusting the Front Speaker Output Balance SETTING If the sounds you hear from the front right and left speakers are unequal, you can adjust the speaker output balance.
  • Page 19: Selecting The Center Speaker Size

    When the shut-off time comes, the receiver turns off (into standby mode) automatically. SETTING To check or change the time remaining until the shut-off time: 1. Press SETTING if necessary, so that the Control % / fi / @ / # buttons work for setting the Sleep Timer. 2.
  • Page 20: One Touch Operation

    About the One Touch Operation JVC’s One Touch Operation function is used to assign and store different sound settings for each different playing source. By using this function, you do not have to change the settings every time you change the source.
  • Page 21: Receiving Radio Broadcasts

    Receiving Radio Broadcasts You can browse through all the stations or use the preset function to go immediately to a particular station. Tuning in Stations Manually On the front panel only: TUNER/BAND 1. Press TUNER/BAND so that the Control % % % % % / fi fi fi fi fi / @ @ @ @ @ / # # # # # buttons work for tuner settings. The indicator above the button lights up.
  • Page 22 MEMORY 4. Press MEMORY again while the selected channel number is flashing on the display. The selected channel number stops flashing. The station is assigned to the selected channel number. 5. Repeat steps 1 to 4 until you store all the stations you want. To cancel a stored preset station Storing a new station on a used number erases the previously stored one.
  • Page 23: Selecting The Fm Reception Mode

    Selecting the FM Reception Mode You can change the FM reception mode while receiving an FM broadcast. TUNER/BAND On the front panel only: 1. Press TUNER/BAND so that the Control % % % % % / fi fi fi fi fi / @ @ @ @ @ / # # # # # buttons work for tuner settings. The lamp above the button lights up.
  • Page 24: What Information Can Rds Signals Provide

    What Information Can RDS Signals Provide? You can see the RDS signals the station sends. To show the RDS signals Press DISPLAY MODE (or DISPLAY on the remote control) while listening to an FM station. DISPLAY MODE Each time you press the button, the display changes to show you the following information: DISPLAY On the front From the...
  • Page 25 From the remote control: Before starting the procedure below, make sure you have selected FM station only using the remote control. If not, the following RDS operating buttons do not work for tuner operation. (Pressing FM/AM activates the remote control for tuner operation.) 1.
  • Page 26: Switching To A Broadcast Program Of Your Choice Temporarily

    Switching to a Broadcast Program of Your Choice Temporarily Another convenient RDS service is called “EON (Enhanced Other Network).” This allows the receiver to switch temporarily to a broadcast program of your choice (NEWS, TA, and/or INFO) from a different station except in the following cases: •...
  • Page 27: Using The Preset Sea Modes

    Using the Preset SEA Modes The preset SEA (Sound Effect Amplifier) modes give you control over the way your music sounds. Note: The preset SEA mode cannot be used for recording. Selecting Your Favorite SEA Mode On the front panel: 1.
  • Page 28 From the remote control: 1. Press SEA ON/OFF so that the SEA indicator lights up on the display. ON/OFF The previously selected mode is recalled (at its previous effect level) and is shown on the display. Each time you press the button, the preset SEA mode turns on and off. Note: When selecting the preset SEA mode, the display will show the current effect level of the preset SEA mode AUDIO...
  • Page 29: Using The Surround Processor

    On JVC’s Hall Surround In order to reproduce a more realistic sound field in your listening room while playing an ordinary stereo source, JVC’s Hall Surround has been designed to give you clear vocals and to create the feeling of a concert hall. The sound is reproduced through the front speakers and rear speakers.
  • Page 30 3. Press ADJUST so that the Control % % % % % / fi fi fi fi fi / @ @ @ @ @ / # # # # # buttons work for surround settings. ADJUST The lamp above the button lights up. 4.
  • Page 31: Speaker Arrangement For Dolby Surround

    Speaker arrangements for Dolby Surround The following illustrations show how to obtain the optimum sound environment for various Dolby Surround settings. Try to find the speaker direction and location to create the optimum sound field. CASE 1 When you have added a center speaker and rear speakers Front Speaker Center Speaker...
  • Page 32: Preparing For Dolby Surround

    Select this mode when you use a center speaker and rear speakers. Select this mode when you use a center speaker without rear speakers. This is JVC’s original surround mode, and is different from Dolby Surround. To use this, see page 24.
  • Page 33 6. Press Control % % % % % / fi fi fi fi fi until “–DELAY +” appears on the display. 7. Press Control @ @ @ @ @ / # # # # # to adjust the delay time of the rear speaker output. Each time you press the button, the delay time changes as follows: DELAY 1 DELAY 2...
  • Page 34 From the remote control: If you have already set the center speaker size following the procedure described on page 14, you can use the remote control for Dolby Surround preparation. SURROUND 1. Press SURROUND ON/OFF so that one of the surround mode indicators (PRO LOGIC, 3CH ON/OFF LOGIC, HALL) lights up on the display.
  • Page 35: Using Dolby Surround

    Using Dolby Surround Once you have set the Dolby Surround adjustments you can use the same adjustments every time you want to enjoy Dolby Surround. On the front panel: 1. Press SURROUND so that the Control % % % % % / fi fi fi fi fi buttons work for selecting the surround modes. SURROUND The lamp above the button lights up.
  • Page 36: Compu Link Remote Control System

    The COMPU LINK remote control system allows you to operate JVC audio components through the remote sensor on the receiver. To use this remote control system, you need to connect JVC audio components through the COMPU LINK- 3 SYNCHRO jacks with the cables (monaural mini-plug supplied with those components): This remote control system allows you to use the four functions listed below.
  • Page 37: Using The Remote Control

    Using the Remote Control You can operate JVC audio and video components with the receiver’s remote control, since control signals for JVC components are preset in the remote control. To operate these components with the remote control, first select a source with the source buttons on the remote control. Then, operate that source using the remote control.
  • Page 38 IMPORTANT: To operate JVC video components using this remote control: • Aim the remote control directly at the remote sensor on the VCR or TV, not on the receiver. After pressing VCR, you can perform the following operations on a VCR:...
  • Page 39: Troubleshooting

    Troubleshooting Use this chart to help you solve daily operational problems. If there is any problem you cannot solve, contact your JVC service center. PROBLEM The display does not light up No sound from speakers Sound from one speaker only...
  • Page 40: Specifications

    50 watts per channel, min. RMS, driven into 8 ohms at 1kHz, with no more than 0.8% total harmonic distortion. 0.8 %* at 30 watts output (* Measured by JVC Audio Analysis System) 20 Hz to 20 kHz (±1 dB) 20 Hz to 20 kHz (±1 dB) 2.5 mV/47 k ohms...
  • Page 41 FM tuner (IHF) Tuning Range Usable Sensitivity 50 dB Quieting Sensitivity Monaural Stereo Signal-to-Noise Ratio Monaural (IHF-A weighted) Stereo Total Harmonic Distortion Monaural Stereo Stereo Separation at REC OUT Capture Ratio Alternate Channel Selectivity Frequency Response AM (MW/LW) tuner Tuning Range Usable Sensitivity MW: Loop antenna External antenna...
  • Page 42 VICTOR COMPANY OF JAPAN, LIMITED 0497OFYOTKJEM EN, GE, FR, NL, SP, IT...

This manual is also suitable for:

Let0021-001aRx-530rbk