Basic Operations; Turning The Power On And Off (Standby); Selecting The Source To Play - JVC LVT0142-006A Instructions Manual

Basic Operations

The following operations are commonly used when you play any sound source.

Turning the Power On and Off (Standby)

On the front panel:
To turn on the power, press STANDBY/ON
The STANDBY lamp goes off. The name of the
current source (or station frequency) appears on
the display.
Current source name appears
100 1k 10k
Current volume level is shown here
To turn off the power (into standby mode),
press STANDBY/ON again.
The STANDBY lamp lights up. A small amount
of power is consumed in standby mode. To turn
the power off completely, unplug the AC power
cord.
From the remote control:
To turn on the power, press AUDIO.
The STANDBY lamp goes off. The name of the
current source (or station frequency) appears on
the display.
To turn off the power (into standby mode),
press AUDIO again.
The STANDBY lamp lights up.

Selecting the Source to Play

Press one of the source selecting buttons.
On the front panel:
DVD MULTI DVD
CD PHONO
From the remote control:
VCR
.
STANDBY
/I
STANDBY/ON
VOLUME
STANDBY
/I
STANDBY/ON
AUDIO
VCR TV SOUND
TAPE/MD FM/AM
SOURCE NAME
CD
Selected source name appears
CH–
L C R D S P
3D-PHONC
S
100 1k 10k
DVD MULTI Select the DVD player for viewing the digital video
disc using the analog discrete output mode (5.1CH
reproduction) on the DVD player.
To enjoy the DVD MULTI playback, see page 20.
DVD
Select the DVD player for viewing the stereo digital
video disc.
VCR
Select the video component connected to the VCR
jacks.
TV SOUND
Select the TV sound.
CD * Select the CD player.
PHONO *
Select the turntable.
TAPE/MD * Select the cassette deck (or the MD recorder).
FM/AM *
Select an FM or AM broadcast.
Each time you press the button, the band alternates
between FM and AM.
Notes:
• When connecting an MD recorder (to the TAPE/MD jacks), change
the source name that appears on the display. See page 11 for
details.
• When you press one of the source selecting buttons on the remote
control marked above with an asterisk ( * ), the receiver
automatically turns on.
Selecting different sources for picture and sound
You can watch picture from a video component while listening to
sound from another component.
Press one of the audio source selecting buttons (CD, TAPE/MD,
PHONO, FM/AM, TV SOUND), while viewing the picture from a
video component such as the VCR or DVD player, etc.
Note:
Once you have selected a video source, pictures of the selected
source are sent to the TV until you select another video source.
THEATER
LIVE CLUB ACTION
VOLUME
DANCE CLUB MUTE AUTO
HALL
PAVILION ATT SLEEP
8