Ricoh B079 Service Manual page 245

SP4 Mode Number
4303* APS A5/LT Size Detection
4305* 8K/16K Detection
4307* APS Sensor Output Display
4428 1 Flag Display
2 Start
3 Flag Reset
4901* SBU Settings
22* A/D Standard Voltage in AE
Mode
23* BK Adjustment
24* EO Adjustment
26* Range Adjustment
27* Gain Adjustment – Ech
28* Gain Adjustment – Och
29* Apli. Dummy Range
Adjustment
30* Apli. Range Adjustment
31* Apli. Gain Adjustment – Ech
32* Apli. Gain Adjustment –
Och
33 Dummy Gain Adjustment –
Ech
34 Dummy Gain Adjustment –
Och
SM
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE TABLES
Function and [Setting]
Determines whether the original is A5/HLT size
when the APS sensor does not detect the original
size.
0: not detected, 1: A5 length 5½ x 8½
If 1 is selected, paper sizes that cannot be
detected are regarded as A5 SEF. If 0 is
selected, "Cannot detect original size" will be
displayed.
Selects whether or not the copier determines that
the original is 8K/16K size when the APS sensor
does not detect the original size.
This SP is intended for use with 8K/16K Chinese
paper sizes only.
For China/Taiwan area:
[0,1 /0/1]
0: 8k/16k not detected – Non-standard size
1: 8K, 16K paper size detect enabled
Other areas:
[0,1 /0/1]
0: 8k/16k not detected - Non-standard size
1: 8k/16k not detected - Non-standard size
Determines whether or not the original size is
detected while the exposure lamp lights during
initialization.
0 ~ 1 /1 / 1 step
0: Original size detection at power on disabled.
1: Original size detection at power on enabled.
DFU
DFU
DFU
DFU
DFU
DFU
DFU
DFU
DFU
DFU
DFU
DFU
DFU
DFU
DFU
DFU
5-19
CÓPIA NÃO CONTROLADA
B079/B082