Reversing The Door Handle - Baumatic BWC1215SS Instruction Manual

o If the seal is not adhering to the cabinet properly, then you
should either:-
a) Use a warm damp cloth and manipulate the seal until it does
adhere to the cabinet properly, all the way around the door.
or
b) Use a hair dryer on its lowest heat setting and lightly heat the
areas of the door seal that are not adhering correctly. The heat
will make the seal more pliable and this will allow you to
manipulate the seal into the correct position.
IMPORTANT: DO NOT HEAT THE DOOR SEAL ON ANYTHING BUT
THE LOWEST HEAT SETTING, OR HEAT THE SEAL FOR A LONG
PERIOD OF TIME. OTHERWISE DAMAGE MAY BE CAUSED TO
THE DOOR SEAL, WHICH WOULD NOT BE RECTIFIED UNDER
THE GUARANTEE FREE OF CHARGE.
IMPORTANT: WHEN YOU HAVE REVERSED THE DOOR OF THE
APPLIANCE, IF YOU HAVE PLACED THE APPLIANCE ON ITS
BACK, YOU MUST WAIT FOR 8 HOURS BEFORE SWITCHING THE
APPLIANCE BACK ON.

Reversing the door handle

1) Remove the gasket on the right inner side of the door to expose
the 2 decorative screws. Unscrew them in a clockwise direction
with a straight screwdriver and then loosen them in an anti-
clockwise direction using your fingers from the outer side of the
door. The screw holes are now ready for installing the handle to
the right hand side.
24