Battery Kit Assembly (Option) - Uninterruptible Power Supplies Online UPS 1K User Manual

Step 4
Remove the top cover of
battery box and replace the
inside batteries.
Step 7

2-5 Battery Kit Assembly (option)

NOTICE: Please assemble battery kit first before installing it inside of UPS. Please select
correct battery kit procedure below to assemble it.
2-battery kit
Step 1: Remove adhesive tapes.
Tapes
Step 3: Put assembled battery packs on
one side of plastic shells.
Step 5
After replacing the
batteries, put the battery
box back to original location
and screw it tightly.
Put the front panel back to the unit.
Step 2: Connect all battery terminals by
following below chart.
Step 4: Cover the other side of plastic shell as
below chart. Then, battery kit is assembly well.
7
Step 6
Re-connect the battery wires.