Install The Ups - Uninterruptible Power Supplies Online UPS 1K User Manual

1. Programmable outlets: connect to non-critical loads.
2. Output receptacles: connect to mission-critical loads.
3. AC input
4. Input circuit breaker
5. Network/Fax/Modem surge protection
6. Emergency power off function connector (EPO)
7. USB communication port
8. RS-232 communication port
9. SNMP intelligent slot
10. External battery connector (only available for long-run models)
11. Input terminal
12. Output circuit breaker

2-2. Install the UPS

For safety consideration, the UPS is shipped out from factory without connecting battery wires.
Before install the UPS, please follow below steps to re-connect battery wires first.
Step 1
Remove front panel.
This UPS can be either displayed on the desk or mounted in the 19" rack chassis. Please choose
proper installation to position this UPS.
Rack-mount Installation
Step 1
Step 2
Connect the AC input and
re-connect battery wires.
4
Step 3
Put the front panel back to the
unit.
Step 2