Camera Control; Image Mode Control - FLIR Voyager II Operator's Manual Addendum

Flir voyager ii thermal camera operator's manual addendum

Hide thumbs Also See for Voyager II:

Table of Contents

432-0002-00-12, Rev100

Camera Control

To control the camera movement, use the arrow button

Please note the following:

• Pressing the single arrow ► and releasing the mouse button in

less than one second lets the camera move one step (1/3 or ¼

of FOV).

• Pressing and holding the single arrow ► allows the camera to

move at 1/10 FOV /second. Releasing the mouse button stops

the movement.

• Pressing the double arrows ►► produces the same results but

at two times the speed (steps and speed).

• Double clicking on the azimuth control area around the boat

symbol in the upper left portion of the GUI will make the

camera turn in that direction.

Note: the Home position cannot be changed through the GUI. When

you click on Home, the camera will return to the last saved position.

Changes to the Home position must be made on site (on the vessel).

Click the Night button to toggle between red (night) and gray (daytime)

modes.

Voyager II Operator's Manual Addendum

Table of Contents