Teltonika E10 User Manual page 13

ModemUSB/E10
In order to connect to the Internet, enter the required data in Connection window. In the main
MCT window click Settings → Connection. Enter connection data as shown below. To save the entered
data, click Update.
Before connecting to the Internet, check the GSM signal quality (see the indicator located on the
right side of the Modem Control Tool program). Also check if the Network indicator is green. If the
signal indicator shows low signal quality, place the modem to more open place where the signal will not
be blocked by thick walls or ceilings. Placing the device near window may also help.
Modem will start connecting to the Internet after the Connect symbol is clicked in the main
MCT window (if the APN, user name and password were entered correctly).
Users Manual
13