8400 Series Mobile Computer
1.7.2 CRADLE OPTIONS
The cradle is designed for charging and communications at the same time. You may
choose a cradle type that best suits your needs.
1) Place the cradle on a flat and clean surface, and seat the mobile computer in the
cradle.
2) Connect the power supply cord to the power jack on the back of the cradle, and then
connect the other end of the power supply cord to a suitable power outlet. The cradle
is ready for charging the mobile computer.
3) If data communications are desired at the same time, you can establish a proper
connection with a computer or remote host. Refer to a separate manual for
configuring the Ethernet Cradle or GPRS/GSM Cradle (EDGE/Quad-band).
Figure 7: Setting up cradle
28
Reference Manual