Lights; Adjusting The Lcd Panel Density - Epson Stylus CX6600 Operation Manual

Lights

Light
! Error
Mode
(Copy,
Card Print,
Scan, Setup)
A, B, C, D

Adjusting the LCD panel density

You can adjust the density of the LCD panel as follows.
1. Press the P On button to turn on this product.
Press the Setup Mode button to enter the Setup Mode.
2.
3. Press the A or the l/r Select button repeatedly until 8.LCD
Contrast appears on the LCD panel, and then press the x Color
button. The LCD panel is shown below.
A
C
4. Adjust the density of the LCD panel. Press the C button to make the
panel lighter, or the D button to make it darker.
When the adjustment is finished, press the OK button.
5.
Pattern Status
On An error occurs.
On Shows the mode this product is in.
On Indicates the button is valid.
LCD Contrast
l -
ononon
+ r
Using the Control Panel
B
D
11