Reducing Or Enlarging Copies Automatically; Selecting The Paper Size; Setting The Number Of Copies - Epson Stylus CX6600 Operation Manual

Reducing or enlarging copies automatically

You can reduce or enlarge a copy automatically by selecting the size of
the original document and the copying result.
Note:
In the "2-up", "4-up", "Repeat", or "Poster" layout, you cannot use this
feature.
Press the B button repeatedly until the option you want appears on the
LCD panel.
Selection
Actual
A4 -> A5
A5 -> A4
10 × 15 -> A4
A4 -> 10 × 15
A4 -> 4" × 6"
4" × 6" -> A4
Auto Fit Page

Selecting the paper size

Select the appropriate size of the paper loaded on the sheet feeder as
described below.
Press the D button repeatedly until the appropriate paper size appears
on the LCD panel.
The paper size you can select are: A4, 10 × 15, 4" × 6", and A5.

Setting the number of copies

Enter the number of copies you want to make, using the numeric buttons
as described below.
26
Copying
Copy result
Copy in the actual size
Copy in the reduced or enlarged size by
selecting the appropriate selection
(original document size -> copy result size)
The value (%) shows the percentage of the
actual size.
Copy in the reduced or enlarged size that fits
the size of the paper