Formatting A Memory Card; Scanning To Your Computer - Epson Stylus CX6600 Operation Manual

c

Formatting a memory card

If the message The card is not properly formatted. Would like to
format the card? appears on the LCD panel, you can format the
memory card as follows:
Caution:
c
All data on a memory card is deleted when you format the memory card.
1. Press the D button.
2. Press the x Color button to start formatting. After formatting is
finished, this product returns to the mode before you began
formatting the memory card.

Scanning to Your Computer

This product allows you to scan an image to a computer or send an e-mail
with the scanned image attached by using this feature. Before using this
feature, make sure you have installed EPSON Scan and EPSON Smart
Panel on your computer.
1. Connect this product to your computer with a USB cable, and then
start up the computer.
2. Place an original document on the document table (see "Placing a
Document on the Document Table" on page 16).
3. Press the Scan Mode button to enter the Scan Mode.
Caution:
Do not remove the memory card or turn off the product while
printing or while the memory card light is flashing. Data on the
memory card may be lost.
Scanning by using the LCD panel and buttons
41