Placing A Document On The Document Table - Epson Stylus CX6600 Operation Manual

Placing a Document on the Document Table

Note:
❏
Keep the document table clean.
❏
You cannot copy films.
1. Open the document cover. Place the original document facing down
on the document table. Make sure that the document is properly
aligned.
Note:
❏
Make sure the document is flat against the glass surface; otherwise the
image becomes out of focus.
❏
An area of up to 2.5 mm from the edge of the document table glass
cannot be copied.
2.5 mm (max.)
2. Close the document cover gently so that the document does not
move.
16
Copying
2.5 mm (max.)