Setting The Register And Consecutive Numbers; Setting The Register Number (#2612); Setting The Consecutive Number (#2613) - Sharp ER-A410 Instruction Manual

ER-A410/A420(SEC)-3 03.12.22 0:18 PM
2

Setting the register and consecutive numbers

Setting the register number
When your store has two or more registers, it is practical to set separate register numbers for their identification.
You may set them with a maximum of six digits.
Procedure
.
2612
Example
To set the register number as "123456"
Setting the consecutive number
The consecutive number is increased by one each time a receipt is issued.
Enter a number (one to four digits) that is one less than the desired starting number.
Procedure
.
2613
Example
Setting the count start number as "1001"
82
Page 82
PGM 2
To set the register number "0"
@ Register number
(one to six digits)
Key operation
. @
2612
Ç
123456
To begin the count from 0001
@ A number (one to four digits) that is one
less than the desired starting number
Key operation
. @
2613
Ç
1000
2612
Ç
Print
Register
number
PGM 2 2613
Ç
Print
Consecutive
number