Advanced Function Programming; Register Number And Consecutive Number Programming - Sharp XE-A212 Instruction Manual

A212_3 FOR THE MANAGER
Training mode text
For every receipts issued in the training mode, **TRAINING** is printed by default. When you want to change
the text, follow the procedure below.
s
Key operation example
S S
The programmed text is printed in double-size characters on the receipts issued in the training
mode.

ADVANCED FUNCTION PROGRAMMING

Register Number and Consecutive Number Programming

1
The register number and consecutive numbers are printed on every receipt or journal.
When your store has two or more registers, it is practical to set separate register numbers for identification. The
consecutive number is increased by one each time a receipt is issued or when a journal print occurs.
For consecutive number programming, enter a number (max. 4 digits) that is one less than the desired starting
number.
Register number
s
Key operation example
Consecutive number
s
Key operation example
48
03.7.5 8:02 AM Page 48
(12 digits)
To keep the current setting
P
87
s P
87
S S
TRAINING
s A
@
1
s @
1
s A
123456
@
2
s @
2
s A
1000
Character keys s
(max. 12 digits)
Print
To set the register number "0"
Register number (one to six digits)
Print
To begin the count from 0001
A number (one to four digits) that is one
less than the desired starting number
Print
A
s A
Register number
s A
Consecutive
number