Displays; Operator Display; Customer Display (Pop-Up Type) - Sharp ER-A410 Instruction Manual

ER-A410/A420(SEC)-2 03.12.22 0:13 PM

DISPLAYS

1

Operator display

The operator display consists of a two-line dot-matrix display (16 characters/line).
Price level / PLU level (e.g. P2L3)
Receipt OFF indicator ("_") / Stock alarm indicator (" • ")
Repeat / Sentinel mark / Power save mark
• Cashier code or mode name
The mode you are in is displayed. When a cashier is assigned, the cashier code is displayed in the REG
or OP X/Z mode. For example, "0001" is displayed when cashier 0001 is assigned.
• Repeat
The number of repeats is displayed, starting at "2" and incremental with each repeat. When you have
registered ten times, the display will show "0". (2 © 3 ......9 © 0 © 1 © 2...)
• Sentinel mark
When amounts in the drawer reaches the amount you preprogrammed, the sentinel mark "X" is
displayed to advice you to remove the money to a safe place.
• Power save mark
When the cash register goes into the power save mode, the power save mark (decimal point) is
displayed.
• Stock alarm indicator
When the stock of the PLU or UPC which you entered is zero or negative, the alarm indicator (decimal
point) is displayed.
• Function message display area
Item labels of departments and PLU/subdepartments/UPC and function text you use, such as %1, (–)
and CASH are displayed here. For the details of function texts, please refer to pages 120 and 121.
When an amount is to be entered or entered, "AMOUNT" is displayed: When an amount is to be
entered, – – – – – – – is displayed in the numeric entry display area with "AMOUNT". When a preset
price has been set, the price is displayed in the numeric entry display area with "AMOUNT".
• Numeric entry display area
Numbers entered using numeric keys are displayed here.
Date and time display
Date and time appear on the display in the OP X/Z, REG, or MGR mode. In the REG or MGR mode, press
=
the key to display the date and time.
Error messages
When an error occurs, the corresponding error message is displayed in the function message display area.
For the details of error messages, please refer to the "Error message table" on page 184.
2

Customer display (Pop-up type)

$
Page 17
Dept. name / PLU or UPC name / function text
(• : Appears right below the seventh place when the item amount is displayed at scale entry.)
Cashier code or mode name
Function message display area
Numeric entry display area
17