ER-A410/A420(SEC)-1
03.12.22 0:13 PM
3
Cashier code entry key
Cashier codes are available in two variants: Variant 1, in which they are displayed ("0000" to "9999"), and
Variant 2, in which they are not displayed (always "
When the cashier code is assigned by the following procedure, the register prints the four-digit cashier code
(variant 2: "
") and the cashier name both on the receipt and journal for every transaction.
Procedure
I Sign-on
Variant 1 :
(Code is displayed.)
Variant 2 :
(Code is not displayed.)
All of these settings depend on how the register has been programmed. For the selection of these
Note
settings, consult your local dealer.
4
Receipt ON/OFF function
You can disable receipt printing in the REG mode to save paper using the receipt function. To disable receipt
q
printing, press the
check the receipt printing status, turn the mode switch to the OP X/Z position or press the
mode. When the function is in the OFF status, the receipt off indicator "_" illuminates.
Your register will print reports regardless of the receipt status. This means that the receipt roll must
Note
be installed even when the receipt state is "OFF" when taking reports.
16
Page 16
To display the current cashier code
Cashier code
‹
Cashier code
key in the OP X/Z position. This key toggles the receipt printing status ON and OFF. To
").
I Sign-off
Variant 1 / Variant 2 :
‹
‹
‹
‹
c
key in the REG