Plu/Upc Price Level Shift - Sharp ER-A410 Instruction Manual

ER-A410/A420(SEC)-2 03.12.22 0:13 PM

PLU/UPC price level shift

Two different price levels can be programmed for each PLU or UPC.
The price levels can be changed for PLU or UPC registrations.
You can shift the PLU/UPC price level (level 1 or 2) by utilizing the price level shift key (
You must program a price level shift mode (i.e. automatic return mode* or lock shift mode**) and the operating
mode to be used for the price level shift (i.e. both REG/MGR modes or MGR mode alone).
* The automatic return mode automatically shifts the PLU/UPC price level back to level 1 after a PLU/UPC shift
entry. You can select whether the price level should return each time you enter one item or each time you
finalize one transaction.
** The lock shift mode holds the current PLU/UPC price level until pressing the price level shift key.
Automatic return mode (for price level)
If your register has been programmed for the price level shift in the automatic return mode, press the price level
shift key before a numeric entry.
Procedure
(each item)
˘
SHIFT
(Q'ty,
(each transaction)
˘
SHIFT
(Q'ty,
Lock shift mode (for price level)
If your register has been programmed for the price level shift in the lock shift mode, press the price level shift
key before a numeric entry.
Procedure
To shift the price level of another PLU/UPC
˘
SHIFT
You can program "printing of the price level text (LEVEL 1/LEVEL 2)". Please refer to
Note
"Programming for optional feature selection" described in the "PROGRAMMING" section of this
manual.
30
Page 30
Numeric entry
PLU/UPC code
@
etc.)
Direct PLU
Numeric entry
PLU/UPC code
@
etc.)
Direct PLU
Numeric entry
PLU/UPC code
@
(Q'ty, etc.)
Direct PLU
Ä
PLU/
UPC
Ä
PLU/
Payment
UPC
Ä
PLU/
UPC
˘
).
SHIFT