Table of Contents
Advertisement
DISPLAYS
Operator display
PLU/SUB
DEPT
RCPT
OFF
Amount:
Cashier code:
Number of repeats for repetitive registrations:
Receipt function status:
Time:
Machine state symbols
:
Appears in the tenth place during programming.
:
Appears in the tenth place when an error is detected.
– (Floating): Appears when a minus department or PLU/subdepartment entry is made or when a discount,
refund, or void entry is made.
:
Appears in the tenth place when the subtotal is displayed or when the amount tendered is smaller
than the sale amount.
:
Appears in the tenth place when the
:
Appears in the tenth place when a transaction is finalized by pressing the
:
Appears in the tenth place when the change due amount is displayed or when the cash/cheque
declaration is compulsory.
–
:
May appear in the far-left three positions at the timing of key entry when the electronic journal
memory is full. (Depending on programming.)
:
May appear right below the eighth and ninth places at the timing of finalization of a transaction
when the electronic journal memory is nearly full. (Depending on programming.)
Also appears right below the tenth place when power saving mode is effective.
Downloaded from:
http://www.usersmanualguide.com/
REPEAT
Appears in the far-right eight (max.) positions.
Appears in the second position (one digit).
The number of repeats is displayed, starting at "2" and incremented with each repeat.
When you have registered ten times, the display will show "0."
Example: (2 → 3 → 4 ..... 9 → 0 → 1 → 2 ... )
The indicator "_" appears in the ninth position when the receipt function is put in the OFF
status.
Appears in the second to sixth positions (using 24-hour format) in the OP X/Z, REG, or
MGR mode. In the REG, or MGR mode, press the
Customer display (Pop-up type)
cashier code
e
key is pressed to calculate a subtotal in foreign currency.
Ñ
key to display the time.
É
'
,
î
or
key.
7
Advertisement
Table of Contents
