Configuring The Environment To Use The Ws Scan Transmission Function; Computer Side: Steps Required To Use This Function - Olivetti d-COLOR MF652 Operation Manual

7.2 Preparation for WS scan

Configuring the environment to use the WS scan transmission function

Enable scanning using the Web service. Also, configure settings to detect this machine using the Web serv-
ice, define information of this machine used as a scanner, and specify how to connect to this machine.
How to configure the setting is explained using Web Connection. For details, refer to [User's Guide: Web
Management Tool].
7.2.3

Computer side: Steps required to use this function

Install a scanner driver required for WS scan transmission in a computer. Then, configure operations to be
performed after scan transmission, in the scanner driver. This example shows a procedure for Windows 7.
Before installation, from the [Start] menu, select [Control Panel] - [Network and Internet] - [Network and Shar-
ing Center] - [Advanced sharing settings], and check that [Network discovery] is enabled.
1
From the [Start] menu, click [Computer] - [Network].
This displays the devices connected to the network.
2
Right-click the scanner icon of this machine, and select [Install].
% Depending on the settings on the computer, the UAC (User Account Control) dialog box may ap-
pear. Check the details, and continue.
% If both of the scan and printer functions of the Web service are enabled on this machine, the ma-
chine is represented by the printer icon.
The driver is installed automatically. When the confirmation dialog box appears, click [Close].
3
From the Start menu, click [Devices and Printers].
4
Right-click the icon of this machine, then click [Scan properties].
5
Click the [Events] tab, and specify the operation (how to save original data) of a destination computer
at scan transmission (WS Scan).
Settings
[Select an event]
[Actions]
6
On the Control Panel of this machine, tap [Direct Input] - [DPWS] in the scan/fax mode, and check that
a target computer is displayed.
The settings on the computer are then completed.
d-Color MF 752/652
Description
Select [Scan].
Select the operation of a destination computer when performing a scan
transmission on this machine.
• [Start this program]: Starts the application for WS Scan that is installed
in a computer selected as a WS Scan destination, and displays the
scanned original data on the application window. Select the application
to be started from the list.
• [Prompt for which program to run]: Displays a list of applications for WS
Scan installed in your computer (destination computer) in the screen of
the computer that performed a scan transmission.
• [Take no action]: Saves original data in the following folder as a file
without starting the application.
On your computer, select [Start] - [Documents] - [Scanned Docu-
ments].
7
7-5