Connecting Speakers - JVC CA-MXJ770V Instructions Manual

AM antenna
1 2
ANTENNA
AM EXT
AM LOOP
FM 75
COAXIAL
AM loop antenna
(supplied)
1
Connect the AM loop antenna to the AM
LOOP terminals as illustrated.
2
Turn the AM loop antenna until you have the
best reception.
To connect an outdoor AM antenna
When reception is poor, connect a single vinyl-covered wire
to the AM EXT terminal and extend it horizontally. (The AM
loop antenna must remain connected.)
For better reception of both FM and AM
• Make sure the antenna conductors do not touch any other
terminals and connecting cords.
• Keep the antennas away from metallic parts of the unit,
connecting cords, and the AC power cord.
3
Vinyl-covered wire
(not supplied)
– 7 –

Connecting Speakers

1
Blue
Speaker
cord
(blue/black)
Red
Black
Speaker cord
(red/black)
To right
speaker
1
Press and hold the clamp of the speaker
terminal on the rear of the unit.
2
Insert the end of the speaker cord into the
terminal.
Match the polarity (color) of the speaker terminals: ª
ª and · ª ª · to · · · · · . ·
to ª ª · ·
3
Release the finger from the clamp.
IMPORTANT: Use only speakers with the same speaker
impedance as indicated by the speaker terminals on the
rear of the unit.
2, 3
Speaker
cord
(blue/black)
Black
To left
speaker
ª ª ª ª