Playing Back Audio Cds; Loading Cds; Playing Back Several Discs - Continuous Play; Basic Cd Operations - JVC CA-MXJ770V Instructions Manual

Playing Back Audio CDs

Loading CDs

On the unit ONLY:
1
Press 0 for the disc tray (CD1 to 3)
you want to load a CD onto.
The unit automatically turns on and the disc
tray slides out. The Powered Rolling Panel
also opens automatically.
2
Place a disc correctly in the circle of the disc
tray, with its label side up.
CORRECT
• When using a CD single (8 cm), place it in the inner
circle of the disc tray.
3
Press the same 0 you have pressed
in step 1.
The disc tray closes, and the corresponding
disc indicator (CD1 to CD3) lights up on the
display.
4
Repeat steps 1 to 3 to place other CDs.
When loading one CD after another
When you press 0 for the next tray you want to place another CD
onto, the first disc tray automatically closes and the next tray slides
out.
About the disc indicators
Each disc indicator corresponds to the disc tray of the same number.
1
Disc number
Disc indicator
• The disc marker lights up for the disc number you have selected.
• The disc indicator flashes while the corresponding CD is being
played.
• The disc indicator goes off when the unit has detected that there is
no CD on the corresponding disc tray.
INCORRECT
2 3
Disc marker
Playing Back Several Discs — Continuous
Play
You can play CDs continuously.
1
Load the CDs.
2
Press one of the disc number
buttons (CD1, CD2, and CD3) for
the disc you want to start play
from.
CD play starts from the first track of the selected disc.
Tracks of the currently
playing disc
Track number
• Pressing CD £¥8 instead of the disc number buttons
starts play back if a CD is on one of the trays.
To stop during play, press 7
To remove a disc, press 0 for the corresponding disc tray.
CD playback sequence
When 3 CDs are loaded on the disc trays, they are played in one of
the following sequences.
• When CD1 is pressed : CD1 ] CD2 ] CD3 (then stops)
• When CD2 is pressed : CD2 ] CD3 ] CD1 (then stops)
• When CD3 is pressed : CD3 ] CD1 ] CD2 (then stops)
* When only 2 CDs are loaded, they are played in the same order,
but the disc tray without a CD is skipped.

Basic CD Operations

While playing a CD, you can perform the following
operations.
To exchange CDs during playback of another disc
Press 0 corresponding to a CD, not playing or selected
currently, to eject and exchange the CD.
If you exchange CDs during play, the current play will not
stop until all CDs you have exchanged are played.
To stop play for a moment
Press CD £¥8.
While pausing, the elapsed playing time flashes
on the display.
To resume play, press CD £¥8 again.
– 13 –
2
1
1 2 3
Elapsed playing time
.
3
SELECT