Playing A Multiplex Sound Cd; Using Subtitles - JVC CA-MXJ770V Instructions Manual

The TV screen will show the following:
VIDEO INTRO
1
4
7
3
Press the number button for the
video intro you want to select.
Playback starts from the selected track.
To stop and cancel the video intro
play, press 7
.
Viewing the Highlights of a Video CD
You can view highlight scenes of the selected track on a
video CD only when PBC is off. These highlight scenes are
created by dividing the track equally into 9 portions and the
beginning scenes (5 seconds each) of those 9 portions are
shown on the display.
1
Press CD 1-3 and the number
button for the track you want to
view the highlights of.
Playback starts.
2
Press HIGHLIGHT on the remote
after a picture appears on the TV
screen.
The highlight play starts and shows in sequence, the first
5 seconds of nine track divisions on the TV screen for 1
minute. If a highlight scene is not selected , it will
automatically stop after a few minutes.
TV screen will show the following:
HIGH LIGHT
1
4
7
3
Press the number button for the
highlight you want to select.
Playback starts from the selected scene.
To stop and cancel the highlight play,
press 7
button.
2 3
5 6
8 9
3
2
1
HIGHLIGHT
2 3
5 6
8 9
Viewing highlights
• If a highlight scene is not selected while 9 scenes are shown on
the TV, highlight scenes of the next track will appear on the
display.
• When a highlight scene is selected, playback starts from the
beginning of the highlight scene, but not from the still image
shown on the display (the part shown is the last part of the
highlight scene, not its beginning)
• During the video intro or highlight play, images shown on the
display may be partially distorted, resulting from noise or
incorrect manufacturing of the disc.

Playing a Multiplex Sound CD

This function is used for multiplex sound discs. See manuals
attached to discs for detailed information.
Operation
By pressing the MPX button consecutively, channel
multiplexing modes are cycled as shown below.
NORMAL
(Left channel/
right channel)
initial*
When Lch MONO or Rch MONO is selected, display indicates
Lch MONO or Rch MONO respectively.
Lch MONO: Only the left channel (instrumental parts) is
played back through both right and left
speakers.
Rch MONO: Only the right channel (vocal parts) is played
back through both right and left speakers.
NORMAL: Used for conventional stereo sources.
When playing back a SVCD (Super Video CD):
STEREO 1
initial*
MONO 4
MPX sound modes
Note that you can hear no audible sound in the STEREO 2, MONO
3 and MONO 4 positions if no audio is recorded on STEREO 2.
Initial*: Whenever you change a CD or when you select another
CD tray, MPX will be reset to the initial mode.

Using SUBTITLES

Effective only when playing back all SVCD (Super Video
CD). SVCD discs may have up to four subtitles which you
can select to view on the TV screen (as an optional feature).
Pressing the SUBTITLE button (on the remote) cycles the
subtitle as shown below:
SUBTITLE 1 SUBTITLE 2
– 19 –
Lch MONO Rch MONO
STEREO 2 MONO 1
MONO 3 MONO 2
SUBTITLE 3 SUBTITLE 4
OFF
(Cancelled)